OwlCyberSecurity - MANAGER

Edit File: starter_graphics.php

<?php
#!/usr/bin/perl
# $Id: starter_graphics.php,v 1.1.2.1 2007/12/29 23:26:05 rjs Exp $
# Starter Graphics:
# Create some basic examples of vector graphics
#
# Stroke a line, curve, circle, arc, and rectangle using the current line width
# and stroke color. Stroke and fill a rectangle.
# Draw an arc segment by drawing a line and an arc, closing the path and
# filling and stroking it.
# Draw a rectangle and use it as the clipping a path. Draw and fill a circle
# using the clipping path defined.
#
# Required software: PDFlib Lite/PDFlib/PDFlib+PDI/PPS 7
# Required data: none

# This is where the data files are. Adjust as necessary.
$searchpath = "../data";
$title = "Starter Graphics";

# create a new PDFlib object
$p = PDF_new();

$xt=20;
$x = 210;
$y=770;
$dy=90;

PDF_set_parameter($p, "SearchPath", $searchpath);

# This means we must check return values of load_font() etc.
    PDF_set_parameter($p, "errorpolicy", "return");

if (PDF_begin_document($p, "", "") == 0) {
	die("Error: " .  PDF_get_errmsg($p));
    }

PDF_set_info($p, "Creator", "PDFlib Cookbook");
    $buf = $title . '  $Revision: 1.1.2.1 $';
    PDF_set_info($p, "Title", $buf);

# Load the font; for PDFlib Lite: change "unicode" to "winansi"
    $font = PDF_load_font($p, "Helvetica", "winansi", "");
    if ($font == 0) {
	die("Error: " .  PDF_get_errmsg($p));
    }

# Start an A4 page
    PDF_begin_page_ext($p, 0, 0, "width=a4.width height=a4.height");

# Set the font
    PDF_setfont($p, $font, 14);

# Set the line width
    PDF_setlinewidth($p, 2.0);

# Set the stroke color
    PDF_setcolor($p, "stroke", "rgb", 0.0, 0.5, 0.5, 0.0);

# Set the fill color
    PDF_setcolor($p, "fill", "rgb", 0.0, 0.85, 0.85, 0.0);

# -------------
    # Stroke a line
    # -------------

# Set the current point for graphics output
    PDF_moveto($p, $x, $y);

# Draw a line from the current point to the supplied point
    PDF_lineto($p, $x+300, $y+50);

# Stroke the path using the current line width and stroke color, and
    # clear it
    
    PDF_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "lineto() and stroke()", $xt, $y,
	"fillcolor={gray 0}");

# --------------
    # Stroke a curve
    # --------------

# Set the current point for graphics output
    PDF_moveto($p, $x, $y-=$dy);

# Draw a B�zier curve from the current point to (x3, y3), using three
    # control points
    
    PDF_curveto($p, $x+50, $y+40, $x+200, $y+80, $x+300, $y+30);

# Stroke the path using the current line width and stroke color, and
    # clear it
    
    PDF_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "curveto() and stroke()", $xt, $y, 
	"fillcolor={gray 0}");

# ---------------
    # Stroke a circle
    # ---------------

# Draw a circle at position (x, y) with a radius of 40
    PDF_circle($p, $x, $y-=$dy, 40);

# Stroke the path using the current line width and stroke color, and
    # clear it
    
    PDF_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "circle() and stroke()", $xt, $y,
	"fillcolor={gray 0}");

# ---------------------
    # Stroke an arc segment
    # ---------------------

# Draw an arc segment counterclockwise at position (x, y) with a radius
    # of 40 starting at an angle of 90 degrees and ending at 180 degrees
    
    PDF_arc($p, $x, $y-=$dy+20, 40, 90, 180);

# Stroke the path using the current line width and stroke color, and
    # clear it
    
    PDF_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "arc() and stroke()", $xt, $y,
	"fillcolor={gray 0}");

# ------------------
    # Stroke a rectangle
    # ------------------

# Draw a rectangle at position (x, y) with a width of 200 and a height
    # of 50
    
    PDF_rect($p, $x, $y-=$dy, 200, 50);

# Stroke the path using the current line width and stroke color, and
    # clear it
    
    PDF_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "rect() and stroke()", $xt, $y,
	"fillcolor={gray 0}");

# ----------------
    # Fill a rectangle
    # ----------------

# Draw a rectangle at position (x, y) with a width of 200 and a height
    # of 50
    
    PDF_rect($p, $x, $y-=$dy, 200, 50);

# Fill the path using current fill color, and clear it
    PDF_fill($p);

# Output some descriptive black text
    PDF_fit_textline($p, "rect() and fill()", $xt, $y,
	"fillcolor={gray 0}");

# ---------------------------
    # Fill and stroke a rectangle
    # ---------------------------

# Draw a rectangle at position (x, y) with a width of 200 and a height
    # of 50
    
    PDF_rect($p, $x, $y-=$dy, 200, 50);

# Fill and stroke the path using the current line width, fill color,
    # and stroke color, and clear it
    
    PDF_fill_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "rect() and fill_stroke()", $xt, $y,
	"fillcolor={gray 0}");

# -------------------------------------------------------------
    # Draw a line and an arc, close the path and fill and stroke it
    # -------------------------------------------------------------

# Set the current point for graphics output
    PDF_moveto($p, $x-40, $y-=$dy);

# Draw a line from the current point to the supplied point
    PDF_lineto($p, $x, $y);

# Draw an arc segment counterclockwise at position (x, y) with a radius
    # of 40 starting at an angle of 90 degrees and ending at 180 degrees
    
    PDF_arc($p, $x, $y, 40, 90, 180);

# Close the path and stroke and fill it, i.e. close the current subpath
    # (add a straight line segment from the current point to the starting
    # point of the path), and stroke and fill the complete current path
    
    PDF_closepath_fill_stroke($p);

# Output some descriptive black text
    PDF_fit_textline($p, "lineto(), arc(), and", $xt, $y+20,
	"fillcolor={gray 0}");
    PDF_fit_textline($p, "closepath_fill_stroke()", $xt, $y,
	"fillcolor={gray 0}");

# -----------------------------------------------------------------
    # Draw a rectangle and use it as the clipping a path. Draw and fill
    # a circle and clip it according to the clipping path defined.
    # -----------------------------------------------------------------

# Save the current graphics state including the current clipping
    # path which is set to the entire page by default
    
    PDF_save($p);

# Draw a rectangle at position (x, y) with a width of 200 and a height
    # of 50
    
    PDF_rect($p, $x, $y-=$dy, 200, 50);

# Use the current path as the clipping path for subsequent operations
    PDF_clip($p);

# Draw a circle at position (x, y) with a radius of 100
    PDF_circle($p, $x, $y, 80);

# Fill the path with the current fill color and clear it
    PDF_fill($p);

# Restore the graphics state which has been saved above
    PDF_restore($p);

# Output some descriptive black text
    PDF_fit_textline($p, "rect(), clip(),", $xt, $y+20,
	"fillcolor={gray 0}");
    PDF_fit_textline($p, "circle(), and fill()", $xt, $y,
	"fillcolor={gray 0}");

PDF_end_page_ext($p, "");

PDF_end_document($p, "");

$buf = PDF_get_buffer($p);
$len = strlen($buf);

header("Content-type: application/pdf");
header("Content-Length: $len");
header("Content-Disposition: inline; filename=hello.pdf");
print $buf;

?>