How to Resolve Epson Printer 000041 Error?

Home Epson Printer How to Resolve Epson Printer 000041 Error?
How to Resolve Epson Printer 000041 Error?
How to Resolve Epson Printer 000041 Error?

000041 Error is very common in the Epson printer, and this error occurs when you install the ink cartridges incorrectly in the device and if the printer is not connected to your system. Similarly, if you have installed cartridges many times but in an appropriate way, you can again experience this problem in your printer.

However, you don’t need to worry because this error is easy to resolve at home by simply troubleshooting your printer. If you don’t know the steps to troubleshoot your printer, you can read this article and find other solutions to fix the Epson printer error code 000041 with ease.

Uninstall the Printer’s Drivers & Reinstall Them Again

One of the best options to address the 000041 error in your Epson printer is to uninstall the old printer’s drivers first and reinstall them again. Make sure the driver should be compatible with your system. Otherwise, it would be challenging for you to work with your device.

Avoid Using the Empty Ink Cartridge

The low ink cartridge and the incorrect installation of the ink cartridge in the printer’s driver are two reasons for the 000041 Error. You can also eliminate this issue by removing metal clips and replacing the expended cartridge with new ones.

Follow the given steps to complete this process:

  • Check whether your Epson printer is off or on. If it is turned off, then you need to turn on your device.
  • After that, identify the expended ink cartridges that are installed in the incorrect way.
  • The next step is to check the little metal clips because these clips have direct contact with the chip that is needed to clean due to dust using a dry cotton cloth.
  • After cleaning the cartridge and metal clips, reinstall the printer driver in your operating system.

How to Correctly Install the Printer’s Ink Cartridges?

  • Turn your Epson printer on and check for the ink cartridge that has been installed incorrectly.
  • If you’ve incorrectly installed the cartridge, remove them and reinstall them again.
  • If the error 000041 is still coming, then you can press or click on the “Start” button to move the cartridges in their accurate position. After this step, you can press the installed ink cartridges down and press the “Start” button again.


Now, you are familiar with the cause of the error code 000041 on your Epson printer. Also, you’ve checked the solutions above to eliminate this error from your device. But, if you are still facing any other issues and need technical experts, you can contact us at Printers Hut via email ( or telephone (1-602-830-2777

Leave a Reply

Your email address will not be published. Required fields are marked *